Coil winding machine
Standard
 

Winding machine Standard without winding fixture

The winding machine "Standard" is particularly suited for heavy winding works. At application of a face plate and clamping arbours, disc and cylindrical coils may be also realised.
The winding machine may be continuously set from approx. 3 - 350 rpm or 6 - 700 rpm. The speed is sufficient for all arising round wires as well as profile wires up to a section of approx. 100 mm▓, yet to dimension.
The machine stops automatically after the pre-set number of turns has been reached. The counter can be switched for both forward and reverse winding. The machine can be stopped during the winding cycle by releasing the foot pedal.
The winding machine is suited for acceptance for all winding fixtures and allow also the application of our winding- and forming devices of 500mm, 700mm and 1000mm loop length.

Technical Data:

Height of centers:

990 mm

Winding °:

max. 1400 mm

Winding shaft °:

50 mm

Winding speed:

stepless approx. 3 to 350 1/min

stepless approx. 6 to 700 1/min.

Torque:

340 Nm, dependent from speed

200 Nm, dependent from speed

Motor power:

0,6/ 1,2 kW

Supply Voltage:

3x 400V; 50 Hz

Dimensions:

approx. 900 mm x 700 mm x 1300 mm

Weight:

ca. 330 kg

Paint colour:

Blue / Yellow

Order No.:

1.010.00

1.010.02

Optional accessories:

Description

Order No.

Face plate ° 300

1.011.10

Face plate ° 400

1.011.14

Face plate ° 600

1.011.16

Face plate ° 800

1.011.18

Clamping arbour ° 250

1.011.30

Three jaw chuck °200

1.011.40

Four jaw chuck °200

1.011.45

Winding fixture "Universell" 4 steps

2.018.10

Winding fixture "Universell" 6 steps

2.018.20

Winding fixture "Fortschritt gro▀" 4 steps

2.037.10

Winding fixture "Fortschritt gro▀" 6 steps

2.037.20

Winding- and forming device 500

2.060.10

Winding- and forming device 700

2.060.20

Winding- and forming device 1000

2.060.30

Subject to technical alterations

Standard

logo_only

D U D E K
Fertigungssysteme
Im Dornschlag 6
77933 Lahr

Tel.: +49 (0) 7821/95 98 79
Fax: +49 (0) 7821/98 08 10
E-Mail:
info@karl-wetzel.de

Senden Sie E-Mail mit Fragen oder Kommentaren zu dieser Website an: webmaster@karl-wetzel.de
Copyright © 2013 D U D E K, Fertigungssysteme