Winding machine Spezial SE
 

The winding machine "Special SE" is a machine of universal application for the rewinding and schooling requirement. Drive is by a pole change motor with 3-step pulleys. The machine stops automatically after the pre-set number of turns has been reached. The counter can be switched for both forward and reverse winding. The clutch gives a smooth start to the winding shaft by both hand lever and foot pedal. The machine can be stopped during the winding cycle by means of a lever stop switch.

Technical Data for Spezial SE:

spezial_se

Wire :

0,1 - 2,0 mm

Center height:

290 mm

Winding :

max. 550 mm

Winding shaft :

35 mm

Winding speeds:

90/ 150/ 180/ 240/ 300/ 480 1/min.

Motor power:

0,4/ 0,5 kW

Supply Voltage:

400V; 50 Cycles

Winding :

50 cm x 65 cm x 50 cm

Weight:

54 kg

Order No.:

1.012.10

Optional accessories:

Order No.

Description

1.011.10

Face plate 300

1.011.14

Face plate 400

1.012.80

Clamping mandrel 250

1.012.70

winding mandrel M8

1.012.72

winding mandrel M10

1.012.74

winding mandrel M12

1.012.76

winding mandrel M14

2.042.00

Winding fixtures "Fortschritt klein" complete

6.087.20

Wire- tension for 1 wire- role

6.087.00

Wire de-reelers for 3 wire- roles

6.087.10

Wire de-reelers for 1 wire- role

1.012.82

Three jaw chuck 125

Center height:

250 mm

Winding :

max. 500 mm

Dimension:

95 cm x 65 cm x 50 cm

Weight:

60 kg

Order No.:

1.012.11

Technical Data for Spezial SE with ground plate and tailstock:

Technical Data for Spezial SE with winding table:

Center height:

290 mm

Winding :

max. 550 mm

Dimension:

150 x 70 cm

Weight:

140 kg

Order No.:

1.012.10 + 1.012.65

Technical Data for Spezial SE with winding table,
ground plate and tailstock:

Center height:

250 mm

Winding :

max. 500 mm

Dimension:

150 cm x 70 cm

Weight:

146 kg

Order No.:

1.012.11 + 1.012.65

Subject to technical alterations

spezial_se_mit_wickeltisch

Spezial SE with winding table and winding fixture "Fortschritt Klein”

logo_only

D U D E K
Fertigungssysteme
Im Dornschlag 6
77933 Lahr

Tel.: +49 (0) 7821/95 98 79
Fax: +49 (0) 7821/98 08 10
E-Mail:
info@karl-wetzel.de

Senden Sie E-Mail mit Fragen oder Kommentaren zu dieser Website an: webmaster@karl-wetzel.de
Copyright © 2013 D U D E K, Fertigungssysteme