Devices for open form coils
 

Subject to technical alterations

With this device there are three separate working sequences:

This device is highly economic as all dimensions and sizes can be set and are fully variable.

The setting time is minimal: approx. 15 min. to 25 min..

Adjusting and cutting machine

richt_und_schneidemaschine_04

With the adjusting and cutting machine can be flat copper wires straightened and cut to length. The cut wires fall into a catch basin.

Floor standing inuslation stripper

stationaere_abisoliermaschine

Technical Data:

Wire dimension:

upward 1 mm

Wire cross section:

round and rectangular

Limit stop (length of stripping):

approx. 20 to 150 mm

Limit stopper for position of brushes (height of stripping):

2 pieces

Hairpin bending device

haarnadelbiegegeraet

Several (depending on cross-section) rectangular wires can be bent simultaneously.
The radius (the eye of the hairpin coil) is exchangeable and can be chosen as required.
The length of the hairpin coil and the width of the wire are adjustable.
Bending is given by a hand lever on a fixed bending element.

Technical Data:

skizze_haarnadelspule

Bending device for winding heads

ausbiegegeraet

The coil is formed by the fixed bending elements operated via hand lever. The bending elements are adjustable in height. An attachment with 4 or 6 bending elements cam be offered.

By simply rotating the bending elements closed or open windings can be made.

Technical Data:

Skizze_spule_ausformen

Bending device for involute

evolventenbiegegeraet

1. Setting the device

2. Operation of the evolute bending device

Order Numbers:

3.065.10

Adjusting and cutting machine; max. 2000 mm cutting length

3.065.11

Adjusting and cutting machine; max. 3000 mm cutting length

3.065.12

Adjusting and cutting machine; max. 4000 mm cutting length

5.086.10

Floor standing insulation stripper

2.058.05

Table for bending device

2.058.10

Hairpin bending device with standard accessories:
Bending diameter 10 x 6 mm high
Bending diameter 10 x 3 mm high

2.058.20

Exchangeable bending diameter
(please state diameter when ordering)

2.058.50

Bending attachment for winding head and connection ends (total of 4 bendings)

2.058.60

Bending attachment for winding head and connection ends (total of 6 bendings)

2.058.62

Support table, adjustable in height, for manually bending the soldering terminals of form coils in wave winding or lap winding.

2.058.80

Bending device for the involute, pneumatic operation

2.058.80.2

Unit for manually pressing the legs, as an attachment to the involute bending device

Special design on request

logo_only

D U D E K
Fertigungssysteme
Im Dornschlag 6
77933 Lahr

Tel.: +49 (0) 7821/95 98 79
Fax: +49 (0) 7821/98 08 10
E-Mail:
info@karl-wetzel.de

Senden Sie E-Mail mit Fragen oder Kommentaren zu dieser Website an: webmaster@karl-wetzel.de
Copyright © 2013 D U D E K, Fertigungssysteme