Motorizedcoil winding machine Standard A
 

Subject to technical alterations

The winding machine "Standard" is particularly suited for heavy winding works and is equipped with a machine bed, tailstock and three jaw chuck.
At application of a face plate and clamping arbours, disc and cylindrical coils may be also realised.
The winding machine may be continuously set from approx. 3 - 350 rpm or 6 - 700 rpm. The speed is sufficient for all arising round wires as well as profile wires up to a section of approx. 100 mm▓, yet to dimension.
The machine stops automatically after the pre-set number of turns has been reached. The counter can be switched for both forward and reverse winding. The machine can be stopped during the winding cycle by releasing the foot pedal.
The winding machine is suited for acceptance for all winding fixtures and allow also the application of our winding- and forming devices of 500mm, 700mm and 1000mm loop length.

Technical Data:

standard_a_massbild

Type:

A

B

A

B

Distance between centers:

650 mm

1050 mm

650 mm

1050 mm

Height of centers:

750 mm

Winding °:

max. 1400 mm

Winding shaft °:

50 mm

Winding speed (stepless):

approx. 3 to 350 1/min.

approx. 6 to 700 1/min.

Torque (dependent from speed):

340 Nm

200 Nm

Motor power:

0,6/ 1,2 kW

Supply Voltage:

3x 400V; 50 cycles

Width (approx.):

1500 mm

1900 mm

1500 mm

1900 mm

Depth (approx.):

700 mm

Height (approx.):

1300 mm

Weight (approx.):

470 kg

510 kg

470 kg

510 kg

Order No.:

1.010.20

1.010.40

1.010.21

1.010.41

 

Optional accessories:

Order No.:

Description:

1.011.10

Face plate ° 300

1.011.14

Face plate ° 400

1.011.16

Face plate ° 600

1.011.18

Face plate ° 800

1.011.30

clamping arbour ° 250

1.011.45

Four jaw chuck ° 200

2.018.10

Winding fixture "Universell" 4 steps

2.018.20

Winding fixture "Universell" 6 steps

2.037.10

Winding fixture "Fortschritt gro▀" 4 steps

2.037.20

Winding fixture "Fortschritt gro▀" 6 steps

2.060.10

Winding- and forming device 500

2.060.20

Winding- and forming device 700

2.060.30

Winding- and forming device 1000

logo_only

D U D E K
Fertigungssysteme
Im Dornschlag 6
77933 Lahr

Tel.: +49 (0) 7821/95 98 79
Fax: +49 (0) 7821/98 08 10
E-Mail:
info@karl-wetzel.de

Senden Sie E-Mail mit Fragen oder Kommentaren zu dieser Website an: webmaster@karl-wetzel.de
Copyright © 2013 D U D E K, Fertigungssysteme