Armature winding machine
 

Subject to technical alterations

The armature winding machine "Special RE" is a universal machine for winding a diverse range of armatures and coils. As the machine is simple to operate and quick to set to the various armature sizes, it is suitable not only for individual winding, but also for batch winding of armatures. The wire guiding device is simple and quick to set according to the armature diameter and the stack length, also for armatures with skewed slots. The wire guide plates lie against the edges of the armature slots with spring pressure and hold the slot insulation firmly. The wire guide plates are opened by a hand wheel and the armature can be further rotated from slot to slot. The armature holder in the machine support is arranged for axial and radial adjustment. In order that the wire guide plates can be set accurately on to the armature slot edges, the axial adjustment is provided with a micrometer adjustment. The various lengths of the armature shaft are set between centers on the armature holder. The armature can be held both with and without centralization of the axis. A guide hook covers the commutator so that the wire insulation is not damaged as the armature is wound.
The armature winding device is easily removed. By fitting various winding fixtures, faceplates, winding mandrels and chucks, stator, form, magnet and transformer coils etc. can all be wound. After the pre-set number of turns has been reached, the machine stops automatically. The counter can be switched for both, forward and reverse winding. The clutch gives a smooth start to the winding shaft by both hand lever and pedal. The machine can be stopped during the winding cycle by means of a lever stop switch. Drive is by a pole-change motor with 3-step pulleys.

Technical Data:

spezial_r_01

Wire ø

0,1 - 1,5 mm

Center height:

250 mm

Winding ø:

max. 500 mm

Wickelwellen ø:

35 mm

Armature ø:

20 - 120 mm

Armature stack length:

120 mm

Armature shaft length:

400 mm

Winding speeds:

45/ 75/ 90/ 120/ 150/ 240 1/min.

Motor power:

0,22/ 0,4 kW

Supply Voltage:

400V; 50 cycles

Dimensions:

95 cm x 65 cm x 50 cm

Weight:

65 kg

Order No.:

1.012.20

Optional accessories:

Order No.

Description

1.012.60

Safety guard

1.012.65

Winding table 150 x 70 cm

1.011.10

Face plate ø 300

1.011.14

Face plate ø 400

1.012.80

Clamping mandrel ø 250

1.012.70

winding mandrel M8

1.012.72

winding mandrel M10

1.012.74

winding mandrel M12

1.012.76

winding mandrel M14

2.042.00

Winding fixtures "Fortschritt klein" complete

6.087.20

Wire- tension for 1 wire- role

6.087.00

Wire de-reelers for 3 wire- roles

6.087.10

Wire de-reelers for 1 wire- role

1.012.82

Three jaw chuck ø 125

Armature winding machine Spezial RE

spezial_re_mit_wickeltisch

Armature winding machine Spezial RE with
winding table and safety guard

logo_only

D U D E K
Fertigungssysteme
Im Dornschlag 6
77933 Lahr

Tel.: +49 (0) 7821/95 98 79
Fax: +49 (0) 7821/98 08 10
E-Mail:
info@karl-wetzel.de

Senden Sie E-Mail mit Fragen oder Kommentaren zu dieser Website an: webmaster@karl-wetzel.de
Copyright © 2013 D U D E K, Fertigungssysteme